mention globabls.asm

Added handling for backspace character

MEMORY.md

@@ -0,0 +1,21 @@
+# Memory Map
+
+To not have to allocate a ton of things at run time the Standard Library uses a static memory map for some purposes
+
+## Overview
+
+| Start | Use |
+| ---- | ---- |
+| `0x0` | Reset Vector |
+| `0x16` | Zero Page |
+| `0x100` | User Code |
+| `?` | Library Code |
+| `0x1_0000` | LUTs |
+| `?` | heap |
+| `0xXXF0_0000` | Stack |
+| `0xXXFF_0000` | quick access |
+
+## Zero Page
+Some values are needed not often enough to get their own special register, but often enough that it makes sense to keep them at a quickly accessible location.
+This is what the zero page is for. its position in memory allows us to load them into a register with a single instruction.
+

README.md

@@ -3,7 +3,8 @@
 This is a standard library for symphony.
 It is both intended as a practical toolkit to develop more complex software as well as a teaching resource.
 
-If you just want to use the standard library [[src/stdlib.asm]] is your main header, include it after your code.
+If you just want to use the standard library [[stdlib.asm]] is your main header, include it after your code.
+You also need to include [[globals.asm]] as the first line in your assembly file.
 
 If you are using it as a learning resource have a look at the [teaching folder](teaching).
 

globals.asm

@@ -0,0 +1,10 @@
+jmp 0x100
+
+@0x10
+screen:
+    frambuffer_ptr: U32 0x0
+    size: U32 0x0
+    position_xy: U32 0x0
+    mode: U32 0x0
+
+@0x100

src/stdlib.asm

@@ -1,8 +1,6 @@
 pub include bit
 pub include imath
-pub include array
 pub include console
-pub include strint
 
 ; Needs to be last!
 pub include LUTs

src/strint.asm

@@ -1,188 +0,0 @@
-; Internal register assignments:
-; r1 - Partially parsed output integer
-; r2 - Parsing position
-; r3 - Character being parsed
-; r4 - Set to -1 if the input is negative
-
-; Convert string to integer
-; Arguments:
-; r1 - Pointer to string
-; Result:
-; r1 - Parsed integer
-; r2 - Pointer to first rejected input byte
-; Clobbers:
-; flags
-; r3 - last character read
-; r4 - Negative marker
-; Note: Unless the input is "0", tail-calls into a base-specific specialization.
-pub atoi:
-mov r2, r1
-mov r1, 0
-mov r4, 0
-load_8 r3, [r2]
-cmp r3, 0x2D ; '-'
-jne atoi_positive
-sub r4, zr, 1           ; Set r4 to -1
-add r2, r2, 1
-atoi_positive:
-load_16 r3, [r2]        ; 2-byte prefix "0b", "0o", "0x", etc.
-or r3, r3, 0x20         ; 2nd char to lower case
-add r2, r2, 2
-cmp r3, 0x3062 ; "0b"
-je atoi_bin_loop
-cmp r3, 0x306F ; "0o"
-je atoi_oct_loop
-cmp r3, 0x3078 ; "0x"
-je atoi_hex_loop
-sub r2, r2, 2           ; no matching prefix, move pointer back
-jmp atoi_dec_loop
-
-; Epilogue
-atoi_done:
-add r1, r1, r4          ; If r4 is -1, negate r1. Else it's 0 and no effect.
-xor r1, r1, r4
-mov flags, 0            ; No error
-jmp r13
-
-; Convert decimal string to integer
-; Arguments:
-; r1 - Pointer to string
-; Result:
-; r1 - Parsed integer
-; r2 - Pointer to first rejected input byte
-; Clobbers:
-; flags
-; r3 - last character read
-; r4 - Negative marker
-pub atoi_dec:
-mov r2, r1
-mov r1, 0
-mov r4, 0
-load_8 r3, [r2]
-cmp r3, 0x2D ; '-'
-jne atoi_dec_positive
-sub r4, zr, 1           ; Set r4 to -1
-add r2, r2, 1
-atoi_dec_loop:
-load_8 r3, [r2]
-atoi_dec_positive:
-sub r3, r3, 0x30 ; '0'
-cmp r3, 9
-ja atoi_done
-add r2, r2, 1
-lsl flags, r1, 2        ; Use flags to help multiply by 10
-add r1, r1, flags
-lsl r1, r1, 1
-add r1, r1, r3
-jmp atoi_dec_loop
-
-; Convert binary string to integer
-; Arguments:
-; r1 - Pointer to string
-; Result:
-; r1 - Parsed integer
-; r2 - Pointer to first rejected input byte
-; Clobbers:
-; flags
-; r3 - last character read
-; r4 - Negative marker
-pub atoi_bin:
-mov r2, r1
-mov r1, 0
-mov r4, 0
-load_8 r3, [r2]
-cmp r3, 0x2D ; '-'
-jne atoi_bin_positive
-sub r4, zr, 1           ; Set r4 to -1
-add r2, r2, 1
-atoi_bin_positive:
-load_16 r3, [r2]        ; check for prefix
-or r3, r3, 0x20         ; 2nd char to lower case
-cmp r3, 0x3062 ; "0b"
-jne atoi_bin_loop
-add r2, r2, 2
-atoi_bin_loop:
-load_8 r3, [r2]
-sub r3, r3, 0x30 ; '0'
-cmp r3, 1
-ja atoi_done
-add r2, r2, 1
-lsl r1, r1, 1
-add r1, r1, r3
-jmp atoi_bin_loop
-
-; Convert octal string to integer
-; Arguments:
-; r1 - Pointer to string
-; Result:
-; r1 - Parsed integer
-; r2 - Pointer to first rejected input byte
-; Clobbers:
-; flags
-; r3 - last character read
-; r4 - Negative marker
-pub atoi_oct:
-mov r2, r1
-mov r1, 0
-mov r4, 0
-load_8 r3, [r2]
-cmp r3, 0x2D ; '-'
-jne atoi_oct_positive
-sub r4, zr, 1           ; Set r4 to -1
-add r2, r2, 1
-atoi_oct_positive:
-load_16 r3, [r2]        ; check for prefix
-or r3, r3, 0x20         ; 2nd char to lower case
-cmp r3, 0x306F ; "0o"
-jne atoi_oct_loop
-add r2, r2, 2
-atoi_oct_loop:
-load_8 r3, [r2]
-sub r3, r3, 0x30 ; '0'
-cmp r3, 7
-ja atoi_done
-add r2, r2, 1
-lsl r1, r1, 3
-add r1, r1, r3
-jmp atoi_oct_loop
-
-; Convert hexadecimal string to integer
-; Arguments:
-; r1 - Pointer to string
-; Result:
-; r1 - Parsed integer
-; r2 - Pointer to first rejected input byte
-; Clobbers:
-; flags
-; r3 - last character read
-; r4 - Negative marker
-pub atoi_hex:
-mov r2, r1
-mov r1, 0
-mov r4, 0
-load_8 r3, [r2]
-cmp r3, 0x2D ; '-'
-jne atoi_hex_positive
-sub r4, zr, 1           ; Set r4 to -1
-add r2, r2, 1
-atoi_hex_positive:
-load_16 r3, [r2]        ; check for prefix
-or r3, r3, 0x20         ; 2nd char to lower case
-cmp r3, 0x3078 ; "0x"
-jne atoi_hex_loop
-add r2, r2, 2
-atoi_hex_loop:
-load_8 r3, [r2]
-sub r3, r3, 0x30 ; '0'
-cmp r3, 10
-jb atoi_hex_add
-sub r3, r3, 0x11 ; 'A' - '0'
-and r3, r3, 0xdf        ; to lower case
-cmp r3, 5               ; 0-5: 6 letters
-ja atoi_done
-add r3, r3, 10          ; Adjust for digits below
-atoi_hex_add:
-add r2, r2, 1
-lsl r1, r1, 4
-add r1, r1, r3
-jmp atoi_hex_loop

tests/strint_test.asm

@@ -1,57 +0,0 @@
-; test harness for strint.atoi
-; Registers:
-; r8 - test address
-; r9 - expected result
-; r10 - actual length
-; r11 - expected length
-li r8, tests
-li r12, end_of_tests
-next_test:
-; Set up arguments and run test
-add r1, r8, 5          ; Start of test string
-mov r13, atoi_test_ret
-jmp stdlib.strint.atoi
-atoi_test_ret:
-
-; Load reference data
-load_32 r9, [r8]       ; Expected result
-sub r10, r2, r8
-sub r10, r10, 5        ; Actual string length
-add r11, r8, 4         ; Address of expected length
-load_8 r11, [r11]      ; Expected length
-
-; Verify results
-cmp r1, r9
-incorrect_result: jne incorrect_result
-cmp r10, r11
-incorrect_length: jne incorrect_length
-
-; Next test
-add r8, r8, 0x10
-cmp r8, r12
-jl next_test
-
-; Done
-success: jmp success
-
-include ../src/stdlib
-
-@0x20000
-tests:
-; inlen is the number of input bytes the function is expected to consume
-; addr  result          inlen  instr
-@0x20000 U32 0           U8 0   "\0"
-@0x20010 U32 0           U8 1   "0\0"
-@0x20020 U32 1           U8 1   "1\0"
-@0x20030 U32 2           U8 1   "2:\0"
-@0x20040 U32 42          U8 2   "42\0"
-@0x20050 U32 67          U8 2   "67lol\0"
-@0x20060 U32 0x69a       U8 5   "0x69a@\0"
-@0x20070 U32 0x4B4       U8 5   "0x4B4g\0"
-@0x20080 U32 0o23        U8 4   "0o239\0"
-@0x20090 U32 0b1011      U8 6   "0b1011\0"
-@0x200a0 U32 0b10001     U8 7   "0b100012\0"
-@0x200b0 U32 0xFFFFFFEB  U8 3   "-21\0"       ; Yuk
-@0x200c0
-end_of_tests:
-